393. Gary Hamilton’s Peterson 80s Tenon Extension Project
The Starting Point
PETERSON’S SUPREME
MADE IN
IRELAND
80s
The Tenon Has Internal Threading To Accept A Tenon Extension
Threading Is Metric M4.5 X 0.75
The Mortise Is Drilled Deeper Than Required (1-1/2”) Than Typical
The Draft Hole Enters On The Top
This Pipe Exhibits All The Features Of The “Sub-System” Design But It Is Missing The Tenon Extension
The Draft Hole Diameter Through Both The Stem Body & Shank Measures 3.5MM
Turning The Diameter To 4.5MM For External Threading
Cutting External Threads With The M4.5 X 0.75 Threading Die
Center Drilling & Through Drilling Of The Tenon Extension To 3.5MM Diameter
Tenon Extension Threading Finished & Test Fit To Stem
Turning & Shaping The Tenon Extension
Tenon Extension Cut To Length & Final Finishing
The Ending Point
With Tenon Extension
Ready For The First Smoke
PETERSON’S SUPREME
MADE IN IRELAND
80s